Assessment Validation Unpacked: Guide to Validating Assessments
Assessment Validation Unpacked: Guide to Validating Assessments
Blog Article
Among the numerous obligations RTOs face post-registration—annual declarations, AVETMISS reporting, marketing compliance—validation is often the most dreaded.
We have numerous articles on validation, but let's go back to the term itself. ASQA defines validation as a quality review of the assessment process.
To put it differently, validation is the process of confirming the accurate parts of an RTO's assessment process and identifying what can be enhanced. A correct understanding of its components makes it less intimidating.
According to Clause 1.8 of the SRTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.
According to the standards, two types of validation are necessary.
The first validation type ensures your RTO's assessments comply with the training package requirements in your scope.
The next type of validation confirms assessments are carried out following the principles of assessment and rules of evidence.
It indicates that validation occurs both before and after the assessment. The focus here is on the first type: assessment tool validation.
An Overview of the Two Types of Assessment Validation
The Basics of Assessment Validation
As noted earlier and in our earlier blogs, validation is divided into two stages: (1) assessment tool validation and (2) post-assessment validation.
Assessment tool validation, also called pre-assessment validation, pertains to ensuring all unit requirements are addressed, as outlined in the first part of the clause, ensuring total workbook compliance.
Post-assessment validation, in contrast, is about ensuring the implementation side, where Registered Training Organisations conduct assessments according to the Principles of Assessment and Rules of Evidence.
In this write-up, we will focus on assessment tool validation.
Procedure for Assessment Tool Validation
Understanding the two types of validation allows us to delve into the specifics of assessment tool validation.
Timing for Conducting Assessment Tool Validation
The goal of assessment tool validation is to make sure all elements, performance criteria, and performance and knowledge evidence are addressed by your assessment tools.
This means that whenever new learning resources are acquired, you must perform assessment tool validation before student use.
You don’t have to wait for the next scheduled validation in your 5-year cycle. Validate new resources right away to ensure they are ready for students.
Yet, this is not the only occasion to conduct this type of validation. Perform assessment tool validation when you:
- resources are updated
- new training products are added to your scope
- you review your course against training product updates
- your learning resources get identified as a risk during your risk assessment
The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.
Selecting Training Products for Validation
Do not forget, this validation ensures compliance of all learning resources before they are used. All RTOs must validate resources for each unit.
Resources Required for Assessment Tool Validation
Teaching Materials
Since you are validating your assessment tools, you will require the entire suite of your learning resources:
Mapping tool – the primary document to check. It reveals which assessment items align with unit requirements, expediting validation.
Learner/student workbook – ensure it is suitable as an assessment tool during validation. Check if instructions are clear and answer fields are sufficient. This is a common issue.
Assessor guide/marking guide – check that there are sufficient instructions for assessors and clear benchmarks for each assessment item. Clear benchmarks are vital for reliable assessment outcomes.
Other related resources – might include checklists, registers, and templates created apart from the workbook and marking guide. Validate them to ensure they fit the assessment task and address unit requirements.
Validation Panel
Clause 1.11 specifies the criteria for validation panel members, indicating that validation can involve one or more persons. RTOs usually require all trainers and assessors to participate, sometimes including industry experts.
As a whole, your validation panel must have:
Vocational competencies and current industry skills relevant to the unit being validated
Recent knowledge and expertise in vocational teaching and learning
Any one of the following training and assessment credentials:
TAE40116 Certificate IV in Training and Assessment or the successor version
Validation tool/template
Having a validation tool helps you with both the validation process and documentation. Using a validation tool makes it easier to look at how each assessment item maps against each unit requirement.
Having a validation tool aids both the validation process and documentation. It simplifies seeing how each assessment item maps to each unit requirement.
At the same time, it can serve as your document evidence that you have validated your resources before letting the students use them.
At the same time, it acts as documentation that you have validated your resources before allowing student use.
ASQA does not provide a specific template for assessment tool validation, but numerous templates can be found online. These tools often have validators look at the tools as a whole to verify if they meet the principles of assessment.
Principles of Assessment Form Yes/No/Partially Comments
1. Fair
2. Flexible
3. Valid
4. Reliable
While templates like these make validation easier, they also allow for judgment errors since there is little room for commenting on each assessment item.
A more detailed template is recommended to thoroughly inspect each unit requirement and the assessment items that align with them. Below is an example:
Element Performance Criteria Assessment Instructions Benchmarks Assessment Tools Rectification Recommendations
What do you Need to Check?
What Requires Checking?
As we covered in our blog post Common Problems In Assessment Tools, your assessment tools must ensure trainers adhere to assessment principles and evidence rules.
Assessment Basic Principles
Fairness – Is equal opportunity and access guaranteed for everyone in the assessment process?
Flexibility – Are multiple options available in the assessment to demonstrate competence based on different needs and preferences?
Validity – Does the assessment evaluate what it is intended to evaluate? Is it a valid tool for assessing the required skill or knowledge?
Reliability – Will the assessment yield the same results every time, no matter who conducts the training? Will different assessors make the same decision on skill competence?
Essential Rules of Evidence
Validity – Does the evidence prove that the candidate possesses the skills, knowledge, and attributes described in the unit of competency and associated assessment requirements?
Sufficiency – Is there enough evidence to ensure that the learner has the skills and knowledge required?
Sufficiency – Is there sufficient evidence to confirm the learner has the required skills and knowledge?
Authenticity – Does the assessment tool ensure that the work is the candidate’s own?
Currency – Are the assessment tools based on current units of competency and modern industry practices?
Although these are regularly covered in VET professional development and nationally recognised training, numerous tools still struggle to meet these requirements.
To avoid using learning resources that do not address all unit requirements, ensure you follow these guidelines:
Live Up to Your Words
Pay attention to the verbs in the unit requirements and ensure they are addressed by the assessment item. For instance, in the unit CHCECE032 Nurture babies and toddlers, one performance evidence requirement requires students to:
Perform each of the following at least once with two different babies under 12 months old in a safe environment, using age-appropriate verbal and non-verbal communication in accordance with service and regulatory requirements:
nappy change
prepare bottles, bottle-feed babies, and clean equipment
prepare solids and feed babies
respond to baby signs and cues suitably
settle babies for sleep and prepare them
monitor and foster age-appropriate physical exploration and gross motor skills
Having students describe the process of changing nappies for babies under 12 months doesn’t meet the unit requirement. Unless it’s intended to assess underpinning knowledge (i.e., knowledge evidence), students should be performing the tasks.
Notice the Plurals!
Pay attention to the numbers. In our example on one of the unit requirements of CHCECE032, this single unit requirement calls for the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just 1 baby won’t cut it.
Pay attention to the numbers. In our CHCECE032 example, one unit requirement requires students to complete the tasks at least once with two different babies under 12 months old. Doing the tasks twice with one baby isn’t enough.
Entire or Not Competent
Observe the lists. As noted above, if students are asked to perform just half the tasks listed, it’s non-compliant. Each assessment item must address all requirements, or the student is not yet competent and the assessment tool is non-compliant.
Can you be more specific?
Provide More Detail
Each assessment get more info item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not confuse students or assessors. For instance:
What kind of information can be included in a work package?
What types of information can be included in a work package?
Possible answers include:
Necessary materials
Corresponding costs
Time frame for activities
Designated duties and responsibilities
When an assessment item demands multiple answers, indicate the number of answers a student must provide. This ensures your assessment is reliable, and the evidence collected is valid.
The same is true for assessment items with double-barrelled questions or those asking for multiple answers at once. Such questions can confuse both students and assessors, as demonstrated in the sample question below:
Identify a hazard and/or environmental issue in the work area and pick the most effective hazard control hierarchy.
Answers can include, but are not limited to:
Weather conditions – work area isolation, engineering controls, PPE
Work area and ground conditions – eliminating hazards, isolating, engineering
People – isolating, engineering, administration
Structural hazards – substituting, isolation, engineering
Chemical hazards – isolation, engineering controls, administrative controls
Equipment or machinery – isolating, use of engineering controls, administrative controls
Avoiding double-barrelled questions simplifies responses for students and allows assessors to judge competence accurately.
Given these requirements, you might think, “Don’t learning resource developers provide audit guarantees?” But such guarantees require you to wait for an audit before rectifying noncompliance. This impacts your compliance history, so it’s wiser to take the safe and compliant route.